Ski nose protection rear bridge aluminum 8mm Hilux Travo 2026+ N4-Offroad
Couldn't load pickup availability
- 100% secure payment
- Equipment Tested & Approved
- Fast & Careful Shipping
Questions about this Product?
We are here to help you.
Strengthen the protection of rear axle nose of your Toyota Hilux Travo 2026+ with this ski N4-Offroad in 8mm aluminum. Its screwed mounting on the axle body does not require welding and is suitable for applications indicated with original electric differential lock.
Protect the rear bridge nose when crossing
Positioned under an exposed area of the aft deck, this Skid Plate forms additional protection against contact with obstacles encountered on the slopes. Its design allows mechanical attachment to the bridge body.
Main features
8 mm aluminum protection
The thickness of 8mm provides dedicated protection to the rear axle nose, without confusing this part with a Skid Plate complete of the base.
Screwed mounting, without welding
The ski is fixed by screwing onto the bridge body. The assembly kit, screws and instructions are provided to carry out the planned installation.
Compatible with the original electrical lock
Advertised compatibility includes models equipped with original electric differential lock. A modified bridge or a blockage added after purchase must be subject to a specific verification.
Removal required for draining
The Skid Plate must be removed to drain the deck. This operation should be planned during vehicle maintenance.
Ideal for 4x4, the Camping and overlanding
This protection is intended for Hilux vehicles that use rocky tracks, uneven paths or off-road travel routes. It completes a preparation of Camping or overlanding by protecting a mechanical area located at the rear of the vehicle.
Technical specifications
| Feature | Specification |
|---|---|
| Brand | N4-Offroad |
| Kind | Skid Plate rear axle nose |
| Material | Aluminum |
| Thickness | 8mm |
| Main application | Toyota Hilux Travo 2026+ — 2.8 D-4D 48 V |
| Fixing | Screwed to the bridge body, without welding |
| Differential lock | Compatible with the original electrical lock on the indicated applications |
| Maintenance | Removing the ski necessary for emptying the bridge |
| Items provided | Protective sheet, assembly kit, screws and instructions |
Compatibility and important information
Main application: Toyota Hilux Travo 2026+, 2.8 D-4D 48 V engine.
Other apps listed by the vendor:
- Toyota Hilux Revo 2016-2025: GUN125 2.4 D-4D 150 hp; GUN126 2.8 D-4D 204 hp from 2021; GGN125 4.0 V6 229 hp.
- Toyota Hilux GR: GUN126 2.8 D-4D 204 hp from 2025; GGN125 4.0 V6 229 hp from 2024.
The bridge version and the blocking equipment must correspond to the intended installation. For a modified bridge or configuration not listed, contact Xperts4x4 before ordering.
Warranty
To find out the duration and warranty conditions applicable to this equipment N4-Offroad, contact the team Xperts4x4. Keep your invoice for any support request.
Frequently asked questions
Should the protection be welded to the bridge?
No. The fixing is screwed onto the bridge body.
Can we drain the deck without removing the ski?
No. Removing the protection is necessary to access the deck drain.
